Knowledgebase
XSCF Log Information Server M-Series
Posted by Kristian Mahadyanto on 07 April 2016 03:47 PM
XSCF>showdate
XSCF>version -c xcp
XSCF>showstatus
XSCF>showdomainstatus -a
XSCF>showhardconf
XSCF>showenvironment
XSCF>showenvironment volt
XSCF>showenvironment -M temp
XSCF>showenvironment -M Fan
XSCF>showenvironment -M power
XSCF>showenviBronment -M air
XSCF>showlogs -M error
XSCF>showlogs -M event
 
Exsample :
 
XSCF> showlogs
XSCF> showlogs error 
Date: Mar 30 15:45:31 JST 2005      Code: 00112233-44556677-8899aabbcceeff00
	Status: Warning                    Occurred: Mar 30 15:45:26.000 JST 2005
	FRU: PSU#1,PSU#2
	Msg: ACFAIL occurred (ACS=3)(FEP type = A1)
Date: Mar 30 17:45:31 JST 2005      Code: 00112233-44556677-8899aabbcceeff00
	Status: Alarm                      Occurred: Mar 30 15:45:26.000 JST 2005
	FRU: PSU#1,PSU#2,*
	Msg: ACFAIL occurred (ACS=3)(FEP type = A1)
XSCF> fmdump
TIME                  UUID                                  MSG-ID
Dec 28 13:01:27.3919  bf36f0ea-9e47-42b5-fc6f-c0d979c4c8f4  FMD-8000-11
Dec 28 13:01:49.3765  3a186292-3402-40ff-b5ae-810601be337d  FMD-8000-11
Dec 28 13:02:59.4448  58107381-1985-48a4-b56f-91d8a617ad83  FMD-8000-OW
:

XSCF> showlogs power
<Example 1>  Power logs are displayed as a list.
XSCF> showlogs power
Date                       Event             Cause          DID  Switch
Mar 30 17:25:31 JST 2005   System Power Off  Pow.Fail/Recov.--   Service
Mar 30 17:35:31 JST 2005   System Power On   Pow.Fail/Recov.--   Locked
Mar 30 17:45:31 JST 2005   Domain Power Off  Operator       00   Locked
Mar 30 17:50:31 JST 2005   Domain Power On   Operator       00   Service
 
<Example 2>  Power logs are listed in order of the most-to-least recent by specifying a start time and end time.
XSCF> showlogs power -t Mar3017:302005 -T Mar3017:492005 -r
Date                       Event             Cause          DID  Switch
Mar 30 17:45:31 JST 2005   Domain Power Off  Operator       00   Locked
Mar 30 17:35:31 JST 2005   System Power On   Pow.Fail/Recov.--   Locked

XSCF> showlogs event
<Example>  XSCF event logs are displayed as a list.
XSCF> showlogs event
Date                      Message
Mar 30 17:45:31 JST 2005  System power on 
Mar 30 17:55:31 JST 2005  System power off

XSCF> viewaudit
<Example> Display all audit records.
XSCF> viewaudit 
file,1,2006-04-26 21:37:25.626 +00:00,20060426213725.0000000000.SCF-4-0
header,20,1,audit - start,0.0.0.0,2006-04-26 21:37:25.660 +00:00
header,43,1,authenticate,0.0.0.0,2006-04-26 22:01:28.902 +00:00
authentication,failure,,unknown user,telnet 27652 0.0.197.33
header,37,1,login - telnet,0.0.0.0,2006-04-26 22:02:26.459 +00:00
subject,1,opl,normal,telnet 50466 10.18.108.4
header,78,1,command - setprivileges,0.0.0.0,2006-04-26 22:02:43.246 +00:00
subject,1,opl,normal,telnet 50466 10.18.108.4
command,setprivileges,opl,useradm
platform access,granted
return,0
 

 

(1 vote(s))
This article was helpful
This article was not helpful

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments:
Help Desk Software by Kayako fusion