Knowledgebase
Panduan Create ZFS Pool from new disk
Posted by Kristian Mahadyanto on 12 June 2015 03:36 PM
Agan agan sekalian, berikut step by step melakukan penambahan disk kedalam ZFS pool.
 
 
Perbedaan ZFS & Tradisional File Systems
root@topaz # devfsadm -c disk (reconfigure new attached devices)
root@topaz # 
root@topaz # 
root@topaz # cfgadm -al (melihat semua disk didalam server)
May 10 15:24:33 topaz   Corrupt label; wrong magic number
May 10 15:24:34 topaz scsi: WARNING: /scsi_vhci/ssd@g60060e8005c0c0000000c0c000000238 (ssd18):
May 10 15:24:34 topaz   Corrupt label; wrong magic number
May 10 15:24:34 topaz scsi: WARNING: /scsi_vhci/ssd@g60060e8005c0c0000000c0c000000237 (ssd19):
May 10 15:24:34 topaz   Corrupt label; wrong magic number
May 10 15:24:34 topaz scsi: WARNING: /scsi_vhci/ssd@g60060e8005c0c0000000c0c000000236 (ssd20):
May 10 15:24:34 topaz   Corrupt label; wrong magic number
May 10 15:24:34 topaz scsi: WARNING: /scsi_vhci/ssd@g60060e8005c0c0000000c0c000000235 (ssd21):
May 10 15:24:34 topaz   Corrupt label; wrong magic number
Ap_Id                          Type         Receptacle   Occupant     Condition
SB0                            System_Brd   connected    configured   ok
SB0::cpu1                      cpu          connected    configured   ok
SB0::memory                    memory       connected    configured   ok
SB0::pci2                      io           connected    configured   ok
SB0::pci3                      io           connected    configured   ok
SB0::pci8                      io           connected    configured   ok
SB1                                         disconnected unconfigured unknown
SB2                                         disconnected unconfigured unknown
SB3                                         disconnected unconfigured unknown
SB4                                         disconnected unconfigured unknown
SB5                                         disconnected unconfigured unknown
SB6                                         disconnected unconfigured unknown
SB7                                         disconnected unconfigured unknown
SB8                                         disconnected unconfigured unknown
SB9                                         disconnected unconfigured unknown
SB10                                        disconnected unconfigured unknown
SB11                                        disconnected unconfigured unknown
SB12                                        disconnected unconfigured unknown
SB13                                        disconnected unconfigured unknown
SB14                                        disconnected unconfigured unknown
SB15                                        disconnected unconfigured unknown
c0                             fc-fabric    connected    configured   unknown
c0::50060e8005c0c030           disk         connected    configured   unknown
c1                             fc-fabric    connected    configured   unknown
c1::50060e8005c0c020           disk         connected    configured   unknown
cfgadm: Configuration administration not supported: Error: hotplug service is probably not running, please use 'svcadm enable hotplug' to enable the service. See cfgadm_shp(1M) for more details.
root@topaz # 
root@topaz # format
Searching for disks...May 10 15:24:52 topaz scsi: WARNING: /scsi_vhci/ssd@g60060e8005c0c0000000c0c000000241 (ssd9):
May 10 15:24:52 topaz   Corrupt label; wrong magic number
May 10 15:24:52 topaz scsi: WARNING: /scsi_vhci/ssd@g60060e8005c0c0000000c0c000000236 (ssd20):
May 10 15:24:52 topaz   Corrupt label; wrong magic number
May 10 15:24:52 topaz scsi: WARNING: /scsi_vhci/ssd@g60060e8005c0c0000000c0c000000236 (ssd20):
May 10 15:24:52 topaz   Corrupt label; wrong magic number
May 10 15:24:52 topaz scsi: WARNING: /scsi_vhci/ssd@g60060e8005c0c0000000c0c000000235 (ssd21):
May 10 15:24:52 topaz   Corrupt label; wrong magic number
May 10 15:24:52 topaz scsi: WARNING: /scsi_vhci/ssd@g60060e8005c0c0000000c0c000000235 (ssd21):
May 10 15:24:52 topaz   Corrupt label; wrong magic number
done
 
c2t60060E8005C0C0000000C0C00000023Ad0: configured with capacity of 49.99GB
c2t60060E8005C0C0000000C0C00000023Bd0: configured with capacity of 49.99GB
c2t60060E8005C0C0000000C0C00000023Cd0: configured with capacity of 49.99GB
c2t60060E8005C0C0000000C0C00000023Dd0: configured with capacity of 49.99GB
c2t60060E8005C0C0000000C0C00000023Ed0: configured with capacity of 49.99GB
c2t60060E8005C0C0000000C0C00000023Fd0: configured with capacity of 49.99GB
c2t60060E8005C0C0000000C0C000000235d0: configured with capacity of 49.99GB
c2t60060E8005C0C0000000C0C000000236d0: configured with capacity of 49.99GB
c2t60060E8005C0C0000000C0C000000237d0: configured with capacity of 49.99GB
c2t60060E8005C0C0000000C0C000000238d0: configured with capacity of 49.99GB
c2t60060E8005C0C0000000C0C000000239d0: configured with capacity of 49.99GB
c2t60060E8005C0C0000000C0C000000240d0: configured with capacity of 49.99GB
c2t60060E8005C0C0000000C0C000000241d0: configured with capacity of 49.99GB
 
 
AVAILABLE DISK SELECTIONS:
       0. c2t60060E8005C0C0000000C0C00000023Ad0 <HITACHI-OPEN-V-SUN-6007 cyl 13651 alt 2 hd 15 sec 512>
          /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023a
       1. c2t60060E8005C0C0000000C0C00000023Bd0 <HITACHI-OPEN-V-SUN-6007 cyl 13651 alt 2 hd 15 sec 512>
          /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023b
       2. c2t60060E8005C0C0000000C0C00000023Cd0 <HITACHI-OPEN-V-SUN-6007 cyl 13651 alt 2 hd 15 sec 512>
          /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023c
       3. c2t60060E8005C0C0000000C0C00000023Dd0 <HITACHI-OPEN-V-SUN-6007 cyl 13651 alt 2 hd 15 sec 512>
          /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023d
root@topaz # 
 
root@topaz # zpool create -m none gfx1-pool c2t60060E8005C0C0000000C0C00000023A
d0 c2t60060E8005C0C0000000C0C00000023Bd0 c2t60060E8005C0C0000000C0C00000023Cd0 ( Disk yang akan masuk ke dalam zpool )
 
May 10 15:29:34 topaz scsi: WARNING: /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023a (ssd16):
May 10 15:29:34 topaz   Corrupt label; wrong magic number
May 10 15:29:34 topaz scsi: WARNING: /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023b (ssd15):
May 10 15:29:34 topaz   Corrupt label; wrong magic number
May 10 15:29:34 topaz scsi: WARNING: /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023c (ssd14):
May 10 15:29:34 topaz   Corrupt label; wrong magic number
 
 
root@topaz # zpool list
NAME        SIZE  ALLOC   FREE    CAP  HEALTH  ALTROOT
gfx1-pool   149G   125K   149G     0%  ONLINE  -
root@topaz # zpool status
  pool: gfx1-pool
 state: ONLINE
 scan: none requested
config:
 
        NAME                                     STATE     READ WRITE CKSUM
        gfx1-pool                                ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Ad0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Bd0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Cd0  ONLINE       0     0     0
 
 
root@topaz # zpool add -f gfx1-pool c2t60060E8005C0C0000000C0C00000023Ed0 ( Menambahkan Disk)
May 10 15:30:51 topaz scsi: WARNING: /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023e (ssd12):
May 10 15:30:51 topaz   Corrupt label; wrong magic number
errors: No known data errors
 
root@topaz # zpool create -m none gfx2-pool c2t60060E8005C0C0000000C0C00000023F
d0 c2t60060E8005C0C0000000C0C000000235d0 ( Membuat pool baru )
May 10 15:33:13 topaz scsi: WARNING: /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023f (ssd11):
May 10 15:33:13 topaz   Corrupt label; wrong magic number
May 10 15:33:13 topaz scsi: WARNING: /scsi_vhci/ssd@g60060e8005c0c0000000c0c000000235 (ssd21):
May 10 15:33:13 topaz   Corrupt label; wrong magic number
 
root@topaz # 
root@topaz # 
root@topaz # 
root@topaz # 
root@topaz # zpool list (menampilkan semua zpool)
NAME        SIZE  ALLOC   FREE    CAP  HEALTH  ALTROOT
gfx1-pool   249G   110K   249G     0%  ONLINE  -
gfx2-pool  99.5G   124K  99.5G     0%  ONLINE  -
root@topaz # 
root@topaz # 
root@topaz # 
root@topaz # zpool status
  pool: gfx1-pool
 state: ONLINE
 scan: none requested
config:
 
        NAME                                     STATE     READ WRITE CKSUM
        gfx1-pool                                ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Ad0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Bd0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Cd0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Dd0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Ed0  ONLINE       0     0     0
 
errors: No known data errors
 
  pool: gfx2-pool
 state: ONLINE
 scan: none requested
config:
 
        NAME                                     STATE     READ WRITE CKSUM
        gfx2-pool                                ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Fd0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C000000235d0  ONLINE       0     0     0
 
errors: No known data errors
root@topaz # zpool status | grep gfx2=pool
root@topaz # zpool status | grep gfx2-pool
  pool: gfx2-pool
        gfx2-pool                                ONLINE       0     0     0
root@topaz # zpool status gfx2-pool       
  pool: gfx2-pool
 state: ONLINE
 scan: none requested
config:
 
        NAME                                     STATE     READ WRITE CKSUM
        gfx2-pool                                ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Fd0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C000000235d0  ONLINE       0     0     0
 
errors: No known data errors
root@topaz # zpool status          
  pool: gfx1-pool
 state: ONLINE
 scan: none requested
config:
 
        NAME                                     STATE     READ WRITE CKSUM
        gfx1-pool                                ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Ad0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Bd0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Cd0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Dd0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Ed0  ONLINE       0     0     0
 
errors: No known data errors
 
  pool: gfx2-pool
 state: ONLINE
 scan: none requested
config:
 
        NAME                                     STATE     READ WRITE CKSUM
        gfx2-pool                                ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Fd0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C000000235d0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C000000236d0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C000000237d0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C000000238d0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C000000239d0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C000000240d0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C000000241d0  ONLINE       0     0     0
 
errors: No known data errors
root@topaz # 
root@topaz # 
root@topaz # 
root@topaz # format
Searching for disks...done
 
 
AVAILABLE DISK SELECTIONS:
       0. c2t60060E8005C0C0000000C0C00000023Ad0 <HITACHI-OPEN-V      -SUN-6007-50.00GB>
          /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023a
       1. c2t60060E8005C0C0000000C0C00000023Bd0 <HITACHI-OPEN-V      -SUN-6007-50.00GB>
          /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023b
       2. c2t60060E8005C0C0000000C0C00000023Cd0 <HITACHI-OPEN-V      -SUN-6007-50.00GB>
          /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023c
       3. c2t60060E8005C0C0000000C0C00000023Dd0 <HITACHI-OPEN-V      -SUN-6007-50.00GB>
          /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023d
root@topaz # format
format> disk    
 
 
AVAILABLE DISK SELECTIONS:
       0. c2t60060E8005C0C0000000C0C00000023Ad0 <HITACHI-OPEN-V      -SUN-6007-50.00GB>
          /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023a
Specify disk (enter its number)[0]: 0
selecting c2t60060E8005C0C0000000C0C00000023Ad0
[disk formatted]
format> volname
Enter 8-character volume name (remember quotes)[""]:^C
format> 
format> p
 
 
PARTITION MENU:
        0      - change `0' partition
        1      - change `1' partition
        2      - change `2' partition
        3      - change `3' partition
        4      - change `4' partition
        5      - change `5' partition
        6      - change `6' partition
        select - select a predefined table
        modify - modify a predefined partition table
        name   - name the current table
        print  - display the current table
        label  - write partition map and label to the disk
        !<cmd> - execute <cmd>, then return
        quit
partition> p
Current partition table (original):
Total disk sectors available: 104842462 + 16384 (reserved sectors)
 
Part      Tag    Flag     First Sector         Size         Last Sector
  0        usr    wm               256       49.99GB          104842462    
  1 unassigned    wm                 0           0               0    
  2 unassigned    wm                 0           0               0    
  3 unassigned    wm                 0           0               0    
  4 unassigned    wm                 0           0               0    
  5 unassigned    wm                 0           0               0    
  6 unassigned    wm                 0           0               0    
  8   reserved    wm         104842463        8.00MB          104858846    
 
root@topaz # 
root@topaz # format
Searching for disks...done
 
 
AVAILABLE DISK SELECTIONS:
       0. c2t60060E8005C0C0000000C0C00000023Ad0 <HITACHI-OPEN-V      -SUN-6007-50.00GB>
          /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023a
       1. c2t60060E8005C0C0000000C0C00000023Bd0 <HITACHI-OPEN-V      -SUN-6007-50.00GB>
          /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023b
       2. c2t60060E8005C0C0000000C0C00000023Cd0 <HITACHI-OPEN-V      -SUN-6007-50.00GB>
          /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023c
       3. c2t60060E8005C0C0000000C0C00000023Dd0 <HITACHI-OPEN-V      -SUN-6007-50.00GB>
          /scsi_vhci/ssd@g60060e8005c0c0000000c0c00000023d
- hit space for more or s to select - 
root@topaz # 
root@topaz # svcadm enable hotplug
root@topaz # 
root@topaz # 
root@topaz # 
root@topaz # cfgadm -al
Ap_Id                          Type         Receptacle   Occupant     Condition
SB0                            System_Brd   connected    configured   ok
SB0::cpu1                      cpu          connected    configured   ok
SB0::memory                    memory       connected    configured   ok
SB0::pci2                      io           connected    configured   ok
SB0::pci3                      io           connected    configured   ok
SB0::pci8                      io           connected    configured   ok
SB1                                         disconnected unconfigured unknown
SB2                                         disconnected unconfigured unknown
SB3                                         disconnected unconfigured unknown
SB4                                         disconnected unconfigured unknown
SB5                                         disconnected unconfigured unknown
SB6                                         disconnected unconfigured unknown
SB7                                         disconnected unconfigured unknown
SB8                                         disconnected unconfigured unknown
SB9                                         disconnected unconfigured unknown
SB10                                        disconnected unconfigured unknown
SB11                                        disconnected unconfigured unknown
SB12                                        disconnected unconfigured unknown
SB13                                        disconnected unconfigured unknown
SB14                                        disconnected unconfigured unknown
SB15                                        disconnected unconfigured unknown
c0                             fc-fabric    connected    configured   unknown
c0::50060e8005c0c030           disk         connected    configured   unknown
c1                             fc-fabric    connected    configured   unknown
c1::50060e8005c0c020           disk         connected    configured   unknown
iou#0-pci#3                    fibre/hp     connected    configured   ok
iou#0-pci#4                    etherne/hp   connected    configured   ok
root@topaz # 
root@topaz # 
root@topaz # zfs list
NAME        USED  AVAIL  REFER  MOUNTPOINT
gfx1-pool   110K   245G    31K  none
gfx2-pool   110K   392G    31K  none
root@topaz # zfs create -o mountpoint=/gfx/data gfx1-pool/data ( Create Mountpoint )
root@topaz # df -h
Filesystem             size   used  avail capacity  Mounted on
/dev/md/dsk/d10         20G    11G   8.7G    56%    /
/devices                 0K     0K     0K     0%    /devices
ctfs                     0K     0K     0K     0%    /system/contract
proc                     0K     0K     0K     0%    /proc
mnttab                   0K     0K     0K     0%    /etc/mnttab
swap                    45G   1.7M    45G     1%    /etc/svc/volatile
objfs                    0K     0K     0K     0%    /system/object
sharefs                  0K     0K     0K     0%    /etc/dfs/sharetab
fd                       0K     0K     0K     0%    /dev/fd
/dev/md/dsk/d30         16G   1.1G    14G     8%    /var
swap                    45G    32K    45G     1%    /tmp
swap                    45G    88K    45G     1%    /var/run
/dev/md/dsk/d501       482M   1.0M   433M     1%    /globaldevices
/dev/md/dsk/d40         20G    55M    19G     1%    /opt
gfx1-pool/data         245G    31K   245G     1%    /gfx/data
 
root@topaz # 
root@topaz # 
root@topaz # zfs list
NAME             USED  AVAIL  REFER  MOUNTPOINT
gfx1-pool        158K   245G    31K  none
gfx1-pool/data    31K   245G    31K  /gfx/data
gfx2-pool        110K   392G    31K  none
root@topaz # zfs create -o mountpoint=/gfx/backup gfx2-pool/backup
root@topaz # zfs list
NAME               USED  AVAIL  REFER  MOUNTPOINT
gfx1-pool          158K   245G    31K  none
gfx1-pool/data      31K   245G    31K  /gfx/data
gfx2-pool          158K   392G    31K  none
gfx2-pool/backup    31K   392G    31K  /gfx/backup
 
root@topaz # mkfile 1m test (membuat file 1 Megabyte)
root@topaz # ls -al
total 6
drwxr-xr-x   2 root     root           3 May 10 15:43 .
drwxr-xr-x   4 root     root         512 May 10 15:42 ..
-rw------T   1 root     root     1048576 May 10 15:43 test
root@topaz # zpool status
  pool: gfx1-pool
 state: ONLINE
 scan: none requested
config:
 
        NAME                                     STATE     READ WRITE CKSUM
        gfx1-pool                                ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Ad0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Bd0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Cd0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Dd0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Ed0  ONLINE       0     0     0
 
errors: No known data errors
 
  pool: gfx2-pool
 state: ONLINE
 scan: none requested
config:
 
        NAME                                     STATE     READ WRITE CKSUM
        gfx2-pool                                ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C00000023Fd0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C000000235d0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C000000236d0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C000000237d0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C000000238d0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C000000239d0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C000000240d0  ONLINE       0     0     0
          c2t60060E8005C0C0000000C0C000000241d0  ONLINE       0     0     0
 

 

errors: No known data errors
(3 vote(s))
This article was helpful
This article was not helpful

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments:
Help Desk Software by Kayako fusion